4-Stage PUMPED 300 GPD (US) RO Unit 40% recovery

£547.10

This 4-Stage Pumped Reverse Osmosis Water Filter is ideal for homes with low mains water pressure. If you wish to check your water pressure, collect water from the closest point you wish to connect your RO unit to. Every 9 litres of water that flows from your tap is equivalent to 1 bar water pressure, so if you collect 27 litres from your tap in one minute then an un-pumped RO unit can be used.

Description

This unit is designed for automatic unattended operation; it is fitted with electronic controls *Please note Product may be a different colour from image shown*

  • Low Pressure Switch – This switches the pump off when the water pressure is reduced either by blocked filters or a lack of water
  • Flush Valve – Provides a 19 second pumped high pressure flush when the system starts up; this removes any accumulated impurities. NB: For extended use we recommend that the manual flush valve is also used to prolong the life of the membrane.
  • High Pressure Switch – This enables the RO Unit to be used with an automatic float valve within the water storage tank. When the storage tank is full the float valve closes off the water supply and the high pressure switch will operate by stopping the unit, closing the waste valve, turning off the pump, and stopping water production. The system will re-start when the ball valve opens again.

Specification

Stage 1: PP Filter made from spun polyester designed to remove particles, impurities from water.

Stage 2: GAC Filter made from granular carbon media contained in food grade housing designed to remove chlorine and odour

Stage 3: CTO made from extruded high quality activated carbon, removes particles as small as 5 microns

Stage 4: RO Membrane 3 x 100 GPD designed to remove, Heavy Metals, Pesticides, Hormones and Bacteria, removes 97-99% of all impurities. The waste water from the first two membranes passes through a third membrane giving up to 40% recovery, which reduces the level of waste water.

Items included:

  • 5 Micron Pre-filter
  • 5 Micron CTO filter
  • 5 Micron GAC filter
  • 3 x 100 GPD RO Membrane
  • 3/4″ Female x 1/4″ Push Fit Tap Adaptor
  • Waste water saddle valve
  • 9 metres connecting ¼” tube Blue Red White

This unit is manufactured to comply with REVERSE OSMOSIS STANDARD NSF58

Technical Information

    • Size H472mm x D170mm x W370mm
    • Operating Temperature 5C-40ºC
    • Operating pressure 15-58psi