Description
This unit is designed for automatic unattended operation; it is fitted with electronic controls *Please note Product may be a different colour from image shown*
- Low Pressure Switch – This switches the pump off when the water pressure is reduced either by blocked filters or a lack of water
- Flush Valve – Provides a 19 second pumped high pressure flush when the system starts up; this removes any accumulated impurities. NB: For extended use we recommend that the manual flush valve is also used to prolong the life of the membrane.
- High Pressure Switch – This enables the RO Unit to be used with an automatic float valve within the water storage tank. When the storage tank is full the float valve closes off the water supply and the high pressure switch will operate by stopping the unit, closing the waste valve, turning off the pump, and stopping water production. The system will re-start when the ball valve opens again.
Specification
Stage 1: PP Filter made from spun polyester designed to remove particles, impurities from water.
Stage 2: GAC Filter made from granular carbon media contained in food grade housing designed to remove chlorine and odour
Stage 3: CTO made from extruded high quality activated carbon, removes particles as small as 5 microns
Stage 4: RO Membrane 2 x 100 GPD designed to remove, Heavy Metals, Pesticides, Hormones and Bacteria, removes 97-99% of all impurities.
Items included:
- 5 Micron Pre-filter
- 5 Micron CTO filter
- 5 Micron GAC filter
- 2 x 100 GPD RO Membrane
- Mains self-piercing connector
- Waste water saddle valve
- 4 metres connecting ¼” tube
This unit is manufactured to comply with REVERSE OSMOSIS STANDARD NSF58
Technical Information
-
- Size H472mm x D170mm x W370mm
- Operating Temperature 5C-40ºC
- Operating pressure 15-58psi
